Need Instructions for RSW Fork brace!!!

2 replies to this topic

Posted November 11, 2006 - 08:05 AM


Is the clamp of the brace suppose to be flushed once you've tightened all 4 allen bolts? Mine seems to have a 1-2 mm clearance on each side after tightening all the bolts. I installed the brace on my XR650L 1/4 to 1/2 inch from the top of the slider casing of the forks, below the oil seal line. Does anybody have closeup pics of the RSW brace installed? How much torque on the bolts? Their website does not have any instructions. Thanks!

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • rcnutt

Posted November 11, 2006 - 03:50 PM


there is a small gap on mine too.1-2mm. just the way there built. I've had mine since feb. and no complaints.

  • sgifford

Posted November 11, 2006 - 04:03 PM


I believe it's 10 ft lbs of torque on the bolts.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.