grey wire


11 replies to this topic
  • davo ttt

Posted November 10, 2006 - 05:02 PM

#1

:cheers: want to know if i cut the grey wire will i have to alter any carbie settings or anything else on a wr 450 06

  • WR_Dave

Posted November 11, 2006 - 07:12 AM

#2

Not if your jetting is good already . WR Dave

  • Dan_Lorenze

Posted November 11, 2006 - 07:46 AM

#3

:cheers: want to know if i cut the grey wire will i have to alter any carbie settings or anything else on a wr 450 06


You should correctly jet your bike and also cut the grey wire.

Do the Euro WR's even have grey wires?

  • MountainMax

Posted November 11, 2006 - 11:41 AM

#4

I done mine, with the other free type mods and Indy's jetting, and it's all good stuff, worth doing.........

  • ferguscawley

Posted November 11, 2006 - 01:03 PM

#5

Do the Euro WR's even have grey wires?



Yes they do. My '06 450 has/had one.
Earlier European / UK model 400s did not.

  • OneToGo

Posted November 11, 2006 - 08:38 PM

#6

You should correctly jet your bike and also cut the grey wire.

Do the Euro WR's even have grey wires?


YES, the EURO version has a grey wire - its fitted to all the 06 versions at least.
The only appreciable difference with the EURO version is lighter springs, YES, the AUSSIE and USA gets stiffer springs. The std damper settings are altered accordingly. All else is pretty much the same.:cheers:

PS. sorry fergus I did not see your reply...

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • davo ttt

Posted November 11, 2006 - 11:12 PM

#7

thanks all :cheers:

  • Thermos O flask

Posted November 12, 2006 - 07:01 PM

#8

Do aussie wr426's have a grey wire to disconnect?

  • WR_Dave

Posted November 13, 2006 - 06:38 AM

#9

Do aussie wr426's have a grey wire to disconnect?




Yes it is in the plug under the tank. Check thumperfaq.com it is the same on the 250 so the info is valid. WR Dave

  • MerlinUK

Posted November 13, 2006 - 07:16 AM

#10

My 03 wr450 has a grey wire (UK Model). I have disconected it.

  • Thermos O flask

Posted November 13, 2006 - 07:36 PM

#11

Thanks for the info

  • GCannon

Posted November 14, 2006 - 09:57 AM

#12

Do aussie wr426's have a grey wire to disconnect?


It is my understanding that the Canadian and Aussie 426 versions are the same. My Canadian version Did Not have a grey wire. It also comes with a differnt Needle and YZ throttle stop.
Hope this helps.:cheers:




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.