DG SuperTrapp Pipe Problems 93'xr650l


1 reply to this topic
  • jaredc28

Posted November 08, 2006 - 01:55 PM

#1

I need help with the removal of the baffles for this pipe. It currently has 12 in and I would like to drop it to 8 or so. I took out all the allen bolts from the back plate, but three of them will not come out all the way, they just spin when I try to loosen them. I unscrewed the phillips nut from the side, but I cannot get any further...I put a strap wrench on the plate/baffles and it will spin 3/4 of a turn but it will not come out...ANY HELP WOULD BE WONDERFUL!:cheers:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • LandSharkGT

Posted November 08, 2006 - 02:11 PM

#2

This a prime example of why anti-sieze is used when using dissimilar metals and fasteners, The threads have probably pulled off the case and now is just spining, Try to pull on the bolt/screw while turning it to see if it will catch anymore threads that are left.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.