CRF wheels on XR 650 R

1 reply to this topic
  • scotgary

Posted November 05, 2006 - 07:53 AM


I have found a good deal on motard wheels for a CRF. Anyone able to tell me if the will fit the XR, and what bits will I need. Thanks for the help.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • eastreich

Posted November 05, 2006 - 08:41 AM


CRF wheels have different axle diameter (larger) than the XR650R's. You may be able to make them work, but you will need to find bearings and seals to downsize the axle required for the wheels. I can also tell you from experience that your local Honda dealer will not be able to help you with this. You will need to try a bearing supply house in all likelyhood. If they are Excel, Talon, or other aftermarket hubs, you may be able to contact them for the correct bearings to make them work. I think that the overall width of the hub is the same, so you should be able to use your stock wheel spacers when you can use your stock axles.

Good Luck!!!!

Related Content

Want to add a kickstart to your XR650L?  Here's how - last post by clc3251

Want to add a kickstart to your XR650L? Here's how

  • 1 reply

DirttyPig 2005 Xr650l Prroject! by braapmebb1moretime

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 22 replies

93 xr650l Restoration Project by Zigster

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies

Honda XR650L 2017 by Chris.GVS

Honda XR650L 2017
  • - - - - -
  • 0 reviews

Engine Loping/Sputtering by tcaldwell

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 4 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.