IMS Tank won't fit

3 replies to this topic
  • lastchild

Posted October 29, 2006 - 09:38 PM


Is there a trick to getting the seat to fit after installing an IMS tank. My doesn't want to fit that great...I hacked away at the little 'button' that the top of the seat slides into but it barely fits.

  • cowboyona426

Posted October 29, 2006 - 09:49 PM


What year of bike? Are you sure you got the tanks mounts installed correctly? There's a chance that if you may have got a WR tank and not a YZ tank, that might be your problem also...

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • lastchild

Posted October 30, 2006 - 06:04 AM


It's an '06. The tank mounted perfectly and the shrouds were a breeze. It's the seat that's giving me fits.

  • sierra77

Posted October 30, 2006 - 07:07 AM


I have an Acerbis, but I've had the little rubber pull tab
that holds the rear of the tank down get stuck under
the seat, making it really hard to push the seat forward.

Related Content


Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017

BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.