Is the stock WR426 taillight have a brake light?

2 replies to this topic
  • NuckingFuts

Posted October 17, 2006 - 08:18 PM


My 02' WR426 has 3 leads (one of which is not in use) from the tail light and the bulb has dual filaments so Im assuming the unused lead is for attachment to a rear brake pressure switch.

Can anyone confirm this?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • billygoat

Posted October 17, 2006 - 08:23 PM


You are correct. Just make pigtail power wire and add a brake switch (mechanical or pressure) and complete the circuit. I think I had to change the bulb as well to a two filament type, but check yours.

  • bigdrtrdr

Posted October 18, 2006 - 09:42 AM


Ya its got the proper wiring, make sure to use a heavy duty lamp or an LED or you will be replacing the bulb often.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.