05, WR 450r jetting


3 replies to this topic
  • mimonroe

Posted October 14, 2006 - 03:15 PM

#1

I have a wr450 I have done the gray wire mod I just bought a new FMF Pipe. I also bought the carb kit. FMF sent me the idle screw???? and a few other parts I live and ride any where from 4000' to 9500' elevation. Can any one help me with a good starting point and or good link with Good diractions on how to set this up for optimum performance

  • kskyles

Posted October 14, 2006 - 03:53 PM

#2

go to the jetting sticky at the top of the forum. indy posted a great starting point for everyone that is great.

i highly recommend the JD kit. it was worth the money.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • mimonroe

Posted October 15, 2006 - 06:42 AM

#3

Thanks

  • Cairn

Posted October 15, 2006 - 12:50 PM

#4

Mimonroe:

Do the "free mods" listed in the jetting forum and follow Indy's advice on jetting, as mentioned. The more you open up your air flow (e.g. air box, exhaust, muffler), the more fuel you're going to need (e.g. larger main jet, lower needle setting, etc.). You'll also find tutorials on this site for doing the carb work, like http://www.thumperta...ad.php?t=309069 and http://www.thumperta...027#post2661027.

Have fun with your new bike! :devil:

Cairn




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.