will an 03 yz450 work with a 02 yz426 stuff?


1 reply to this topic
  • 800screws

Posted September 25, 2006 - 03:39 PM

#1

will the cdi, wiring harness, headpipe, etc. from a 02 yz426 work with a 03 yz450 engine? could the 03 be bolted into a 02 frame? is it a direct swap?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted September 25, 2006 - 03:53 PM

#2

Don't think so. Even if the other hard points on the engine line up, the rear one is different. The 450 uses a larger diameter swing arm bolt, and the width of the rear mount point may be different.

The CDI, coil, and harness will only work if they can be matched up to the generator harness on the 450.





Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.