Jump to content

2006 YZ Fork Help


Recommended Posts

I need some big help in finding a part, it's the same in all '06 big YZ's 125-450F

1C3-2316A-N0-00 .VALVE COMP.

I had a shop do some work for me a couple of months ago and they funked up the part....the plastic pressure spring holder which is part of item number 12 http://parts.yamaha-motor.com/partimage.gifx?d=84063,2,0 .

I have the part on order, but its due date is Oct 5, on backorder...after GMB.

So are there any Yamaha dealers on this board that may have a donor bike sitting on the showroom floor or any ideas? I would replace the part with a new one once mine shows up.

Link to comment
Share on other sites

No way to fab one out of aluminum or brass temporarily?

I asked that question and was told "no" by the shop working on my suspension.

Satch, I'm kind of a suspension retard when it comes to the internals, so I'm not sure if it's the same part you mentioned. I have not had a chance to run to the shop yet and check out the damaged parts...been a helluva busy week, but that is a different story. I was told the part is not sold separate and is part of the compression valve and only on the newer '06 forks. I will get some pictures Monday I hope.

Link to comment
Share on other sites

I need some big help in finding a part, it's the same in all '06 big YZ's 125-450F

1C3-2316A-N0-00 .VALVE COMP.

I had a shop do some work for me a couple of months ago and they funked up the part....the plastic pressure spring holder which is part of item number 12 http://parts.yamaha-motor.com/partimage.gifx?d=84063,2,0 .

I have the part on order, but its due date is Oct 5, on backorder...after GMB.

So are there any Yamaha dealers on this board that may have a donor bike sitting on the showroom floor or any ideas? I would replace the part with a new one once mine shows up.

call ENZO 714-541-5218

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...