2007 Yamaha's Have Real Footpegs???


26 replies to this topic
  • Satch0922

Posted September 09, 2006 - 05:19 AM

#1

Well at least the 2007 WR's appear to have real pegs. I did not find anything that specifically said they were 57mm pegs but the photo sure looks like it! Wonder if the YZF gets the same treatment?

Posted Image

  • Satch0922

Posted September 09, 2006 - 05:23 AM

#2

looks like the YZF's still get the same cheesy pegs....that's too bad.

Posted Image

  • grayracer513

Posted September 09, 2006 - 07:23 AM

#3

I'll bet you can switch them, but the price isn't liable to be less than Lightspeed.

  • kyle450rider

Posted September 09, 2006 - 07:26 AM

#4

Whats wrong with the stock pegs?

  • Satch0922

Posted September 09, 2006 - 08:06 AM

#5

if you have ever ridden a bike with 57mm pegs....you would know why the stockers are not up to snuff by today's standards.
Posted Image

  • kyle450rider

Posted September 09, 2006 - 09:11 AM

#6

I have a set of fastways for my new ride,i just wondered what was wrong with the stockers on the yamaha.They look plenty wide to me.

  • yzfireguy

Posted September 09, 2006 - 09:15 AM

#7

Compare a set of fastways to stoke and see the huge difference in the width, huge.

  • RCannon

Posted September 09, 2006 - 11:31 AM

#8

I think the 07 yz's get the special "titanium" pegs..uh, yea. Mine look great in the drawer. Very light and cool looking.

I ride with the lightspeed 57mm pegs.

Maybe we will luck out and get 57mm ti pegs on the yz's....yea, right.

  • Ga426owner

Posted September 09, 2006 - 12:53 PM

#9

Those WR pegs are spiffy....similar to my lightspeeds......once you ride with a 57mm peg...you will never go back to stock again.........so much more control, jumping/landings are easier....I luv my lightspeeds... :thumbsup:

  • DPW

Posted September 09, 2006 - 06:24 PM

#10

....similar to my lightspeeds......once you ride with a 57mm peg...you will never go back to stock again.........so much more control, jumping/landings are easier....I luv my lightspeeds... :thumbsup:


Stop it...I'm broke... :applause:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • RCannon

Posted September 09, 2006 - 06:27 PM

#11

The steel lightspeeds are only a hundred. They dont look as cool as Satch's ti pegs, but they work just as well. Their ti pegs could qualify as artwork.

  • MACHO104

Posted September 09, 2006 - 06:41 PM

#12

trust me ,Satchamoto bought them on ebay for far less than retail.

  • DPW

Posted September 09, 2006 - 06:51 PM

#13

trust me ,Satchamoto bought them on ebay for far less than retail.


Yeah he told me the price he paid on eBay...
:thumbsup: :applause:

  • Troutman

Posted September 09, 2006 - 07:07 PM

#14

I have size 14 feet and the stockers are killing me on the bigger jumps. Does lightspeed make lowboy pegs? and if not what are the best wider lowboy pegs you can pegs you can get for around $100?

  • aford541

Posted September 09, 2006 - 07:38 PM

#15

That is cool but I personally know of three riders that broke the stock cast titanium pegs off.
I will still buy the sunline/lightspeed titanium pegs because they wont grenade.

Sunline / Lightspeed

  • Satch0922

Posted September 09, 2006 - 07:42 PM

#16

Yeah he told me the price he paid on eBay...
:applause: :applause:


Ahhh yes...I am a slave to the eBay! LOL

DPW....MACHO....see you guys in 3 weeks at the GMB....if I don't see you before then! :applause:
:thumbsup:

  • aford541

Posted September 09, 2006 - 07:48 PM

#17

Ahhh yes...I am a slave to the eBay! LOL

DPW....MACHO....see you guys in 3 weeks at the GMB....if I don't see you before then! :applause:
:thumbsup:


I'd like to ride with you guys if I ever get to TX.

  • Satch0922

Posted September 09, 2006 - 07:57 PM

#18

You need to GET TO TEXAS.....the Garrett Berg Memorial race is October 1st!

If you swing it....this is an event you will always remember....and one fun track.....

Posted Image

  • DPW

Posted September 09, 2006 - 08:06 PM

#19

DPW....MACHO....see you guys in 3 weeks at the GMB....if I don't see you before then! :applause:
:thumbsup:



I might get one more ride in before GMB....to much stuff going on the home front. We are going to 3 Palms on Friday 9/29... :applause:

  • barch88

Posted September 09, 2006 - 08:13 PM

#20

That is cool but I personally know of three riders that broke the stock cast titanium pegs off.
I will still buy the sunline/lightspeed titanium pegs because they wont grenade.

Sunline / Lightspeed

Those Sunline's are nice.





Related Content

Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.