Fuel Screw for 426

4 replies to this topic
  • ivesy

Posted August 30, 2006 - 12:36 AM


Hi guys, can anyone tell me if their is an aftermarket fuel screw like the gytr for the 450 which makes adjustment easy. Or is the 426 one the same as the 450?

  • jbrooks26

Posted August 30, 2006 - 12:48 AM


I don't know for sure, but I think they would be the same. However, there are several companies out there that make the easy adjust fuel screw for the 426. You can get them from ZipTy, or you can get them on E-bay from several other manufacturers. Bottom line, just get one. Hope this helps,


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted August 30, 2006 - 08:12 AM


According to a couple of catalogs I just looked at, the 426 screw and the 450 screw will interchange, if that's what you're asking. If you just want to know if anyone makes one for a 450, it's more like everyone makes one. They should be available just about anywhere.

  • Milhaus

Posted August 30, 2006 - 02:41 PM


If and when you get one, be sure to stretch the spring a bit so you get more seating pressure, otherwise they are prone to backing out. Just my experience. :thumbsup:

  • ivesy

Posted August 30, 2006 - 05:51 PM


Thanks for your help, I'll give the 450 gytr one a go

Related Content


Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.