takeing the plunge


No replies to this topic
  • timothypg

Posted August 15, 2006 - 05:40 PM

#1

got the top end of my 86 xr6r. i'am waiting for a reply on a few questions from barnums, if all is good i will be going to a 628 and a stage one or so cam, new valve springs and new ceramic coated oem head pipe(ordered) i will rebuild the carbs, re-jet (already 5 sizes larger than stock) and it could go more. i think i will be pulling a pretty large amount of fuel air mixture. i have never had a prob. w/ the dual carbs so i'am going to get as much as i can from them. i will be sending the top end to barnums so that will be good. this thing should friggin haul. look out 650r's.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.