starting/flooding problems

1 reply to this topic
  • luckyride

Posted August 12, 2006 - 06:15 AM


I cannot get my bike to start (02 426). I thought I flooded it so i drained the float bowl and fuel kept pouring out, so I turned the fuel tank off and that stopped it. I figured the floats were stuck so I took the float bowl off and sprayed cleaner into it and the floats moved freely a (it did not appear dirty at all anyway). I don't know what would cause this any help would be much appreciated, I need to fix this asap, I missed riding today because I could not figure it out last night.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • ncmountainman

Posted August 12, 2006 - 08:00 AM


draining the float bowl will keep the flow coming (the gas stops flowing as the float rises in the bowl,therefore requiring a full bowl to stop) if it was stuck open there will be gas flowing out of the overflow tube. thats probly not your problem from what you describe :thumbsup:

Related Content


Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.