CRforks on YZF


4 replies to this topic
  • mjbarr5

Posted August 05, 2006 - 08:04 PM

#1

Is it possible to use the forks from a CR250 2 stroke on a YZ426? I have triple clamps from both the YZF and the CR.

  • Turismo

Posted August 05, 2006 - 08:22 PM

#2

Try it and find out if you have both.
Why bother asking?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • JSanfilippo

Posted August 05, 2006 - 09:01 PM

#3

Is it possible to use the forks from a CR250 2 stroke on a YZ426? I have triple clamps from both the YZF and the CR.


I'm pretty sure the showas on the CR are 47 mm and the Kayabas on the YZ are 46 mm. Why not run the 48mm forks off of the 05 YZ 450f?

  • aford541

Posted August 05, 2006 - 09:05 PM

#4

Any thing is possible although I'm not sure why you would want to do that, the springs on the 250 are too soft.

  • JSanfilippo

Posted August 05, 2006 - 09:10 PM

#5

Any thing is possible although I'm not sure why you would want to do that, the springs on the 250 are too soft.


But they are ohhh so plush!! Those showas are good on the track and in the woods...its really amazing




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.