California Dual Sport plate and Green Sticker?

21 replies to this topic
  • tp3dxf

Posted July 24, 2006 - 06:32 PM


Mine is like this:
And i have broken the bulb housing and bent the frame pretty bad.

I really like the Scotts Performance bracket, but there's no license plate bulb.

The Baja Designs is the one I have broken. They actually have a new model that is a little different then the one in the pic. It's a little better but not much It broke. It also cost me over $50 bucks and lasted a month.

The Scotts looks better. The problem here is that the plate is the wide point on the very rear of the bike. If you have a slow speed tip over say on a switchback it's very likely that the edge of the plate will hit the ground. That will then cause the bracket to bend and crack. Once it's cracked it just a matter of time before it's eaten by the rear tire.

I think my solution is to mount the plate vertical. That way the rear fender will take the hit first not the plate. Or get a YZ fender and mount the plate to it without the bracket and mount the plate vertical then add a tail light.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • johnnyjeep

Posted July 24, 2006 - 07:08 PM


I agree, the BD aluminum one sucks. They sent me their LED light w/plate bracket. Here it is on the bike.
The draw back, if you call it that, is you have to use a YZ fender
John in Vegas


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.