Prefered brand on YZ chaindrive

7 replies to this topic
  • Goosedog

Posted July 18, 2006 - 04:49 PM


I need to replace chain and both sprokets, what's the preference around here? (and, yes I'm too lazy to do a search)

  • grayracer513

Posted July 18, 2006 - 05:26 PM


Regina ORN6 chain, Tag rear sprockets, and Tag or Renthal fronts. I've had excellent service from these.

The fronts are not that far apart in quality. As long as they aren't cheapos, they'll work. The Tag rear is very light, reasonably priced at $65, and last a lot longer than most aluminum sprockets do. Not as long as Ironman, of course, but they are lighter and less costly.

The Regina chain has been spectacular. The one on my '03 is two years old, and is still less than 1% longer than new. I've had to adjust it maybe 3 times, and the maintenance consists of washing it with the rest of the bike, then lubing it. Runs freely, too. All that, for only $70. :thumbsup:

  • aedwards07

Posted July 18, 2006 - 05:48 PM


Either the new Sunline chain and sprocket combo OR a DID 520ERT2 chain and Renthal sprockets.Have had excelent luck with both.

  • Way Fast Whitey

Posted July 18, 2006 - 06:18 PM


i got the Ironman/DID combo from motosport. very happy with the price and quality of the sprockets and chain. i would recommend it to anybody, too bad i'll have to buy another one soon :thumbsup:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • DPW

Posted July 18, 2006 - 06:54 PM


Ironman and a DID ERT2...

  • Terrain Rider 4z

Posted July 18, 2006 - 08:08 PM


Cheap steel sprockets all the way. They are heavy, but last longer than the aluminum if you are just a trail rider. I agree with the Regina O-Ring. I have had 3 DID X-Rings and the Regina O-Ring has lasted much longer.

  • ncmountainman

Posted July 19, 2006 - 06:21 AM


hey mark,i've given up on the fancy sprockets and gone back to sunstar steel. the weight difference between them and the sidewinder trimetal i was running is only a few oz. i've found a new x-ring chain from parts unlimited (its made by EK) that seems to be of better quality than the regina i was running,the regina did give the best service life of any chain i've run so far though (a whole yr) we'll see how this one stacks up. best part is the whole combo is $108,and can probly be had cheaper through TT with their price break :thumbsup:

  • Ga426owner

Posted July 19, 2006 - 06:55 AM


Ironman and a DID ERT2...

The absolute best quality sprockets, longest lasting, non oring/non chainslide wearing option available today......I have years of use on my 03 and and the only combo I will ever use until a better lighter chain is made! PERIOD :thumbsup: :ride:

and the sprockets have a guarantee :cry:

Related Content


Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

Thinking about Yamaha 250... by Arctic Pride

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

yz400f throttle bog by yz400fmaniac

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • * * * * *
  • Hot  28 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.