Need jetting advice 06 xr650r 5000+ ft


2 replies to this topic
  • puxx

Posted July 17, 2006 - 09:21 PM

#1

I have an 06 650r with the airbox mods without holes in numberplate drilled out tip I was thinking about cutting off that second to the last disk in the tip I ordered the larger carb insulator I usually ride anywhere from 5000 to 12000 feet and its not usually hotter than 90 I was wondering if anyone has and advice on jetting it

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • danbart

Posted July 17, 2006 - 10:15 PM

#2

65 - 160 - 3rd clip position - 2.5 turns out


This should get you in the ballpark!

  • cleonard

Posted July 18, 2006 - 07:10 AM

#3

I don't have a 650r, but my 600 likes the needle one clip leaner starting at about 7000 feet. By 10000 feet it really needs it.





Related Content

Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 7 replies
Forums
Photo

Fell Off Trailer by usafxr


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies
Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 2 replies
Forums
Photo
Supercross

Supercross Preview 2017 Part 1: Championship Contenders by Chris Cooksey


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  148 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.