xr650l suspension setup?


1 reply to this topic
  • jct9841

Posted July 14, 2006 - 01:18 PM

#1

I am getting ready to experiment with alternate suspension setups on my ''01 xr650L.

I've searched and found several threads on "sag." Based on the weak operators manual documentation I'm not sure where the stock rear spring preload position should be. It's cranked down pretty tight/stiff with about 5/8" worth of threads showing at the top of the shock.

If a step by step procedure (with pictures) exists on this subject please forward link.

Thanks in advance,

JT (250lbs., 6'4")

01 Honda XR650L
04 Bmw 1150gs

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • jct9841

Posted July 14, 2006 - 01:28 PM

#2

Upon further searching I found a relevant document on this site but would welcome any other suggestions.

JT





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.