Stock 06 Tripple clamps/Scotts ster/Stabr


5 replies to this topic
  • motocross10113

Posted July 13, 2006 - 12:47 AM

#1

ok how are the stock tipple clamps on the 06 do you like them how many are putting AFM ones on??? And you guys that have the stablizers with stock clamps... are you running the regular mount or sub mout have any pics and were did you get them from??? when ordering from bto sports they have the options for what clamps ....stock....and then if you have oversized bars and not and thats extra and thought??? would i have to add thoughs when i shouldnt since in 06 then came with 1 1/8 bars??? help! :ride:

  • FeliX 450

Posted July 13, 2006 - 11:33 AM

#2

I dont know about 06 YZ250f, biut i had to buy after market tripleclamps to run a Scotts stabializer!!! It cost me total of $600 for stabializer, Top BRP triple clamp and all the hardware to install the stabializer!!! Check my garage i have some pics of my stabializer and alll that stuff!!!!! hope this helps!!! :ride:

  • ben_suhard

Posted July 13, 2006 - 01:00 PM

#3

http://www.motocross...E10D77E9F1D3786

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • motocross10113

Posted July 13, 2006 - 01:59 PM

#4

Has anyone just put it on top and cut out there foam on the bar pad so they can still have the pad??? I have heard off ppl smacking there jaws on that not good :ride: And for you guys that have them Is it money well spent cuz its 450 bucks at a min. For one brand new with Oversized bars.....

  • barch88

Posted July 13, 2006 - 02:56 PM

#5

It say's the factory riders put it behind the number plate...why don't you just do that? I seem to sometimes hit my chest on the bar pad when landing hard, lucky I have a chest protecter, but if I had that thing on my bars I wouldn't want to hit it and break it @ $450 a pop.

  • RCannon

Posted July 13, 2006 - 03:34 PM

#6

I added aftermarket clamps, RG3, to get a different offset. The stock clamps are very well built and good looking. Unless you want a different offset or a stabilizer wont mount to them, skip the aftermarket clamp. Your paying for looks.





Related Content

Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.