Cylinder slightly out of spec

1 reply to this topic
  • mankind810

Posted July 12, 2006 - 01:23 AM


Hi all,
I have a 2000 yz 426 and the cylinder is slightly out of spec .
The specs from Yamaha are 95 mm to 95.01mm i had mine measured and it came in at 95.02mm the cylinder surface is in excellent condition with no scoring what so ever.
So my question is can i just put in a brand new piston pin , piston and rings?. Also all other associated parts are in spec.

Bear in mind i am only a twice a month rider for a few hours through the bush and a cylinder in australia costs $550.00.
Thankyou :ride:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • gigan

Posted July 12, 2006 - 04:10 AM


So your saying that you are .01mm out? Come on that really is nothing. Is that all that is wrong with it? Do you have a problem with the Piston?

Related Content


100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews

Thinking about Yamaha 250... by Arctic Pride

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.