680 kit

2 replies to this topic
  • dydko

Posted July 12, 2006 - 12:44 AM


I have one question Im going to rebuilt my BRP diuring winter (sleve, piston)
question is, Is that possible to change only sleve and piston Wiseco, and gaskets and left anything else stock ?. Price is the same as stock size piston and slave.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • snaggleXR650

Posted July 12, 2006 - 03:54 AM


You can, but the big bore will bring out the weak spots in the engine, if there are any. While you are in there, it would be a GOOD idea to check the crank and rod bearings, valve seats, seals, valve springs and valves themselves, along with the cam chain. Speaking of the cam, a Hot Cams stage 1 or 2 would do well with the 680kit. Do it RIGHT the first time, and save yourself time and $ later when you have to redo it all due to catastrophic failure. Don't listen to me though, there are others on here who have done the 680kit and are much more knowlegdeable than I. Do some searches on "680 kit" and read posts from Bruce Borynack (BWB I think his screename is). Good luck.

  • BWB63

Posted July 12, 2006 - 03:45 PM


Use Millinium Techonolgy or go through Luke's racing and have the cylinder re-nikasil, way better then steel sleeve! They make it three time thicker then stock. Tighter and won't cold sieze on you like the steel does. Spend just a little more and do the valves to stainless steel (the stock ones are already shot, you'll need new intake for sure)

Related Content


Post Apocalypse, ThumperTalk style! by Justin Pearson

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies

93 xr650l Restoration Project by Zigster

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies

1993 XR600R rebuild by ove

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  41 replies

FCR40 Tuning Woes- XR600R by aTuWitty

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  37 replies

Can anyone identify this xr600 piston? by ms_mtn24

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 4 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.