how do i start the damb 426!!!!!!!?


81 replies to this topic
  • Doughnut

Posted July 07, 2006 - 09:26 PM

#61

I think you should start with this:

Posted Image



HAHAHAHAHHAHAHAHA :ride: :ride:

You also might want to re-pack your exhaust bearing while your down there changing the oil around. There should be a little o-ring filled with bearing right where the header and the head of the bike meet. You'll have to buy a seal driver to get them back in there. Then your bike will start first kick becuase you could have an exhaust leak and thats why its just so hard to start.

  • 01 426

Posted July 08, 2006 - 03:34 AM

#62

i got a 426 just wonderin if u are suppose to check the oil when cold or hot coz when it is cold it says there is no oil in it and when hot it says i have too much oil in it

  • e30M3

Posted July 08, 2006 - 06:08 AM

#63

i hooked every thing up. i put gas in it. i have no air filter and no oil and no coolant in the motor. i never had it running and just want to make sure it runs.
so how do i start it. i been kicking it for 10 mins not even a pop. its like 70 degrees out right now.


Well, someone wise once told me: "there are no stupid questions, just stupid people, now what was your questions..."

  • elcamino76

Posted July 08, 2006 - 06:22 AM

#64

you are supposed to check the oil when the bike is WARM not after you are done ridding. Warm the bike up for allitle and then check it.

  • getdrunk

Posted July 08, 2006 - 10:27 AM

#65

i got a 426 just wonderin if u are suppose to check the oil when cold or hot coz when it is cold it says there is no oil in it and when hot it says i have too much oil in it



wonce its up to opperating temp thats when you check it.

i also heard sumthing about their being a screen in some oil tank lines (the bottom one). well it can get clogged up kinda and that will cause it to over fill while your driving. thats what i heard some wear.

  • mpl239

Posted July 08, 2006 - 03:52 PM

#66

A few seconds of metal to metal friction at running pressures can fuse metals together. If you really do not believe this, sell the bike before you destroy it and find a safer hobby where you cannot hurt yourself or more importantly, others. :ride: :ride:

  • ONLY4STROKES

Posted July 08, 2006 - 04:59 PM

#67

You didnt put in any oil, or coolant...and you are trying to start your bike?

Doug

  • Jekel

Posted July 08, 2006 - 07:45 PM

#68

If you aren't going to put in the oil prior to start, then sell it!!!!! You need to respect the bike and the engine!!!!!!!!!!!!!!!!!!!!

  • kyleyz

Posted July 09, 2006 - 10:22 AM

#69

If i was your momma, I'de sell the god damn peice of crap without oil in it and get you back in school as soon as possible.

You said that you wanted to make sure your engine isnt a peice of crap so you started it without oil......i find this to be very ironic.



dipsh!t...................:ride:

  • dumper_uk

Posted July 09, 2006 - 02:07 PM

#70

I really can not believe you people are actually falling for this??? :ride:

HELLO ? did this ever actually sound like a genuine question?

To me,it sounded from the word 'go' like a wind up..

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • kid on a 426

Posted July 09, 2006 - 03:07 PM

#71

I really can not believe you people are actually falling for this??? :ride:

HELLO ? did this ever actually sound like a genuine question?

To me,it sounded from the word 'go' like a wind up..

I am sad to say this but... Yes this guy is serious. He has other threads that are just as amazingly stupid. I just wish it was some crappy piece of junk engine he was ruining instead of my own flesh and blood. :ride:

  • kyleyz

Posted July 09, 2006 - 03:09 PM

#72

I really can not believe you people are actually falling for this??? :ride:

HELLO ? did this ever actually sound like a genuine question?

To me,it sounded from the word 'go' like a wind up..

welll, this kid i dumb enough to take the washer off of a spark plug for more power out of a pocket bike......i believe he i dumb enough to run an engine without oil!

  • getdrunk

Posted July 10, 2006 - 10:20 AM

#73

welll, this kid i dumb enough to take the washer off of a spark plug for more power out of a pocket bike......i believe he i dumb enough to run an engine without oil!


no i just hot!!!

  • motobeck

Posted July 26, 2006 - 10:59 AM

#74

You know what they say... "You can't fix stupid"!

  • Kyle Prior

Posted July 26, 2006 - 11:16 AM

#75

I think if hes gonna be this dumb, he needs to not do anything, and sell all of his bikes, quads, and cars, and be forced to ride a bicycle for the rest of his life...

  • motobeck

Posted July 26, 2006 - 11:29 AM

#76

Whatever he does, he needs to be wearing a helmet!

  • GreenKLX

Posted July 26, 2006 - 02:58 PM

#77

please just let this thread die. :thumbsup:

  • Satch0922

Posted July 26, 2006 - 05:39 PM

#78

yes,,,this thread must die...just like that poor 426 engine is going to do.

I am thinking....this Getdrunk guy is just GrayRacer's alias and he is trying to add some humor to the site. Somebody fess up....this has to be a joke. No one and I mean NO ONE is this stupid and admits it! :thumbsup:

  • worxster

Posted July 31, 2006 - 11:40 AM

#79

yes,,,this thread must die...just like that poor 426 engine is going to do.

I am thinking....this Getdrunk guy is just GrayRacer's alias and he is trying to add some humor to the site. Somebody fess up....this has to be a joke. No one and I mean NO ONE is this stupid and admits it! :cry:



Bro i think this man is bent (Get Drunk) "Get Drunk if you are reading this thread understand this .....it requires some skill to ride a motorcycle and even more to work on one , clearly you were not blessed in the skills dept. so clearly the best would be rather get a ride on mower and do something constuctive with your time and mow your folks lawn !!! :ride:

Let us know where you get your CRACK From obviously premium Quality - your new alias should be "COMPLETELY GWAFFED" Later Trolley Case :ride:

:thumbsup: "ALWAYS REMEMBER IT TAKES ALL KINDS TO MAKE THE WORLD GO AROUND" :ride:

  • yamaha racing 230

Posted August 02, 2006 - 05:07 PM

#80

try starting fluid duh





Related Content

Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.