Dual sporting my WR

11 replies to this topic
  • robertt

Posted June 30, 2006 - 10:36 AM


I have an '03 wr450 that I'm going to get plated. I'm in Idaho so I am under the impression I won't have any trouble. I actually didn't plan on doing anything other than getting the plate and bolting it to the rear fender. My problem is I am now running the YZ fender do to too many crashes. So my question is: 1 does anybody have a 03 fender they took off there bike and it is just taking up space in their garage? or 2 does anyone have a recommendation of a low profile tail light I could bolt on to my existing fender?

  • MountainMax

Posted June 30, 2006 - 02:40 PM


Baja Designs makes a liscence plate bracket with led tailight that works with the YZ rear fender, they also makes all the parts or kits you need for a DS kit.

  • Birdy426

Posted June 30, 2006 - 08:14 PM


The BD light looks pimp, and works great, too.

Posted Image

  • Lit_Dueler

Posted July 04, 2006 - 11:49 AM


CAn ou tell me where you got light and plate holder. Also, what else was needed to complete the job

  • mtrablue

Posted July 04, 2006 - 12:21 PM


acerbis also makes a small l.e.d. tail light/license plate holder. be aware, the acerbis unit is small and it might be best to take a look at one before you spend any money. i had to trim my plate to fit it and i wouldn't want to depend on someone being able to see the light in traffic. that said, if your laws are minimal (like missouri) and you don't need much, it's pretty trick. it weighs next to nothing so it will not cause any problems with a YZ fender.

  • beakr

Posted July 04, 2006 - 02:55 PM


In Idaho, you are required to have a rear view mirror, a horn, a brake/tail light, and a hi/low beam headlight, along with your plate, and of course, insurance. No turn signals or DOT tires required. Other than that it is pretty easy to do.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • cwarren

Posted July 04, 2006 - 11:50 PM


These guys make some killer LED lights that will mount onto a YZ fender.


  • face_plant

Posted July 05, 2006 - 07:59 AM


as of tuesday july 11 my 450f will be plated in west virginia ) hopefully
anyway ZETA makes a sweet kit. i got the turn signals rear fender, light and a nice custom decal for real cheap.... wheeling cycle imports them and i am too lazy to make an ebay store. but if u need info call 888-500 2454 ask for will or forrest. as far as i know they are the only ones to import them in the eastern us

i will post a pic when its on the road...... i cant wait to ride it
the bike has been mine for a month now but the "R" title is why its not home yet

  • Lit_Dueler

Posted July 05, 2006 - 09:22 AM


Hey Birdie
Where did you get that light assembly. Did it come with the hardware and brake swiches as well


  • Birdy426

Posted July 05, 2006 - 11:32 AM


Hey Birdie
Where did you get that light assembly. Did it come with the hardware and brake swiches as well


It's a Baja Designs part. You can order it from the TT store, here:


Yes, it comes with the mounting hardware, but not the switch. You can also get the switch from the TT store, here:


  • MountainMax

Posted July 05, 2006 - 12:12 PM


Man that TT store must be HUGE

  • Lit_Dueler

Posted July 07, 2006 - 06:34 AM


Awesome, Thanks Birdie
The parts are ordered and on there way.

Lit_dueler :ride: :ride:


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.