Getoff bends stock risers on 06 450F- need help


6 replies to this topic
  • sbrown

Posted June 15, 2006 - 02:11 PM

#1

I used the "raise the stock risers with some washers from the hardware store" method. I 2 and 3/4ered a set of 6 tall rock hard whoops while attempting to double-double-double them. Long story short, I crashed hard and bent the left side stock handerbar riser a little bit backward. The stock risers are raised up about 8mm with the washers. My question is where can I get some new risers for my 06 YZF 450 which will give me the 10 mm rise I want? I have seen the GYTR risers and they said only a 5mm rise and some forward too. I want the full 10 mm if possible.

Websites or mail order stores with the goods would be appreciated.

  • muddza

Posted June 15, 2006 - 02:42 PM

#2

Go and buy yourself a second set of top clamps and a set of longer bolts. Then flip these upside down place your handle bars in and put your original clamps back on top, add your new bolts in and presto, Your 10mm risers you required for a third of the price.

  • xcape

Posted June 15, 2006 - 07:33 PM

#3

Go and buy yourself a second set of top clamps and a set of longer bolts. Then flip these upside down place your handle bars in and put your original clamps back on top, add your new bolts in and presto, Your 10mm risers you required for a third of the price.


great idea.....I hate when I dont think of things simple like that..... :excuseme:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • cowboyona426

Posted June 15, 2006 - 08:36 PM

#4

I hear PMB makes a 10mm up/10mm forward mount but have not seen any pics of them yet.

  • CISCO

Posted June 16, 2006 - 04:57 AM

#5

check out www.brpit.com they have nice hardware!

  • sbrown

Posted June 16, 2006 - 11:10 AM

#6

Thanks for the idea, really innovative and practical. I still need at least one unbent bar riser to do it though. I'll look into it.

  • sbrown

Posted June 16, 2006 - 11:11 AM

#7

Thanks for the web site and I'll check into it.





Related Content

Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.