Edelbrock pump adjustment?

No replies to this topic
  • dale

Posted June 10, 2006 - 03:09 PM


This is on an XR400, but I'm posting here because there seems to be a lot more Edelbrock info than the 400 forum. I've had the E carb for a year and switched it to a different bike.
My question is all about the pump, I know how to adjust the needle.
Is there a baseline pump adjustment? Like so many turns out?
When I installed it on the first bike I went 1/2 turn out from factory setting, and it seemed to work ok/good. On next bike I ended up 3/4 more turn out to get it to snap instead of bog. Maybe I should have done that before? So now I want to know where I'm at and record it. Can I bottom it out and count the turns out like a fuel screw?

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.