Loose valve on my 05 450

No replies to this topic
  • snow

Posted June 10, 2006 - 10:56 AM


Well just one valve was out of spec here is what I found

As you sit on the bike Rear right intake was .25 middle intake was .11 and left intake was .12

Front right valve is .23 Front left valve is .238

So i took the cam on the intake and pad was 190 so that means I need a 200 or a 205 right??? Not sure on wich would be the best so can anyone help me out??? Thanks Also I thought the valves would tighten over time not loosen???

Related Content


Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F

Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

YZ450F 03 Sparks driving me crazy by SirAttard

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.