2003 wr450 exhaust mods ...


No replies to this topic
  • revolution01

Posted June 09, 2006 - 03:30 PM

#1

Question from the UK

Have an 03 450 `us import` as it turns out.

Are there any mods to be done to the standard exhaust (3 bolt plate with arrester inside), have put in the pro-moto insert but it still retains the spark arrestor (not needed in the UK but does it make a difference to power?) dont want to make it too noisey as we do alot of `stealth` night rides :prof:

Mods done

JD kit
Grey wire cut
Throttle stop sorted
Standard Yamaha insert gone (replaced with `Pro-Moto`)
Pivot pegs
pastrana pro taper bars mounted on forward risers :D
gps
Guts high/hard foam and cover
Utah bash plate
Flatland racing rad braces
Revalved and sprung front and rear
Auxillary lights running off the battery via a fused switch (40watts) running aswell as the main lights :applause:




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.