Carb Needle Seat...which end first?

3 replies to this topic
  • swells454

Posted June 06, 2006 - 07:16 AM


Help! I took my carb apart to clean it...long story...and the needle seat came out (fell out would be a more appropriate term here) :applause: ...before I could tell which end goes back into the carb body first.
My manual's picture is too hard too see well enough to determine this. It says something like the larger (maybe smaller) diameter goes in first...I don't have the manual in front of me...but they both appear to have the same diameter.
Anyone have any idea?

  • XR650L_Dave

Posted June 06, 2006 - 07:55 AM


You may be able to see where the needle has been seating on the seat.


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • HawkGT

Posted June 06, 2006 - 09:36 AM


Pretty sure the longer end with the larger opening goes in first. Can't remember for sure. It can only be assembled one way though. It can be placed either way but only one way will allow the emulsian tube to screw in behind it. Get it in backwards and the tube won't go up/in far enough to catch threads.

  • swells454

Posted June 06, 2006 - 09:48 AM


Great...Thanks for the input!

Related Content


Engine Loping/Sputtering by tcaldwell

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 2 replies

ignitech programmable XR650L CDI by brianhare

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies

Fell Off Trailer by usafxr

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies

What was your path to Beta? by officialhopsof

Dirt Bike   Make / Model Specific   Beta
  • Hot  79 replies

Cle Elum Sunday 5/29: Looking for dual sport tips by TigerTanker

Dirt Bike   Dirt Bike Regional Discussion   Northwest
  • Hot  32 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.