risers for 06 yz450f


10 replies to this topic
  • ranger520

Posted May 26, 2006 - 06:33 PM

#1

Does anyone know where I can find some 10mm risers for stock clamps?

  • SureBlue

Posted May 26, 2006 - 06:48 PM

#2

See if you can find the answer from here
http://www.thumperta...earchid=1514270
Some use washers, some GYTR clamps, there is even one TTer fabricating and selling 10 mm and 15 mm risers, could not find his name. Whatever you do, use longer bolts if you put 10 mm risers under stock clamps.

  • cowboyona426

Posted May 27, 2006 - 10:48 AM

#3

Coop39 sells 10mm and 15mm risers, but the 15's don't work on the 450. The 10's work, but the studs on the clamps no longer reach the locking part of the nut. I have a set of his 10's and used blue locktite when I bolted it up, so far no problems. Replacing the studs is not an option unless you want to cut the old one off, then drill/tap for a new one to be put in... more work than it's worth IMO.

  • DPW

Posted May 27, 2006 - 06:24 PM

#4

http://www.yamaha-mo...0/0/detail.aspx

  • SureBlue

Posted May 27, 2006 - 10:51 PM

#5

Coop39 sells 10mm and 15mm risers, but the 15's don't work on the 450. The 10's work, but the studs on the clamps no longer reach the locking part of the nut. I have a set of his 10's and used blue locktite when I bolted it up, so far no problems. Replacing the studs is not an option unless you want to cut the old one off, then drill/tap for a new one to be put in... more work than it's worth IMO.

I forgot the stock ones have no bolts like my protaper mounts had but fixed studs, so not worth replacing, true. A set of higher aftermarket clamps is the way to go if you need more than 10 mm rise.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Fastdaddy

Posted May 28, 2006 - 04:47 PM

#6

I have a set of pro moto billet 10 mm up and 10mm forward for the 06. I am pricing a sub mount and scotts steering stabilizer will know on tuesday the 30th if im getting it. If the price is right on the new setup, Ill let you have my old riser for half of what I paid. If interested pm me.

Mike

  • nam6667

Posted May 07, 2007 - 06:36 PM

#7

I have a set of pro moto billet 10 mm up and 10mm forward for the 06. I am pricing a sub mount and scotts steering stabilizer will know on tuesday the 30th if im getting it. If the price is right on the new setup, Ill let you have my old riser for half of what I paid. If interested pm me.

Mike

Rockymountainatv has what you want.

http://www.rockymountainatv.com/

  • nam6667

Posted May 07, 2007 - 06:38 PM

#8

Does anyone know where I can find some 10mm risers for stock clamps?

Rockymountainatv has what you need.
http://www.rockymountainatv.com/

  • never59

Posted May 09, 2007 - 10:52 AM

#9

your link is to the home page? what is it you are talking about?

Rockymountainatv has what you need.
http://www.rockymountainatv.com/



  • 35yz450F

Posted May 09, 2007 - 11:31 AM

#10

Does anyone know where I can find some 10mm risers for stock clamps?


5mm Spacer #GYT-2S275-10-03 Yamaha Part in Tall Bar Mount Kit #GYT-2S275-10-03

Posted Image

Stack two.

  • xcape

Posted May 09, 2007 - 12:10 PM

#11

The stud is not long enough for 2 spacers on the stock mounts?? I was thinking about pulling the stud and using a bolt.......





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.