rebore


3 replies to this topic
  • millydog

Posted May 25, 2006 - 11:39 AM

#1

just having my 87 xr600 rebored and new piston cylinder was standerd do i fit a standerd head gasket or thee oversize 100mm one any help cheers Gareth.

  • cleonard

Posted May 25, 2006 - 12:05 PM

#2

Guess I don't understand the question. The stock bore is 97mm. If you put in a 100mm piston, then you need a 100mm gasket. Otherwise use a stock gasket.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • millydog

Posted May 25, 2006 - 02:05 PM

#3

sorry i should of said the cylinder is only slightly scored so i will get away with a 1mm rebore and over size piston at the most.cheers.

  • Border Patrol

Posted May 25, 2006 - 02:26 PM

#4

sorry i should of said the cylinder is only slightly scored so i will get away with a 1mm rebore and over size piston at the most.cheers.


Dude...what are talking about?

If you need to bore, you need to take an oversized piston and your cylinder to a machine shop. If you're going to run an OEM piston, you have two choices.

PISTON (OS 0.25) 205959-001 $92.44
PISTON (OS 0.50) 206274-001 $92.44





Related Content

Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
Reviews

Honda XR650L 2017 by Chris.GVS


Honda XR650L 2017
  • - - - - -
  • 0 reviews
Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
Forums
Photo

Post Apocalypse, ThumperTalk style! by Justin Pearson


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.