DP tire pressures on DOT tires


2 replies to this topic
  • DPWR400

Posted May 21, 2006 - 05:58 PM

#1

Those of you who have converted your WR's to DP's and use DOT tires, what do you like to run for tire pressures? I want to run higher for mileage but lower for traction. What seems to be the happy medium for these kind of tires, I dont want to hassle with constantly changing pressures. TIA

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Bamster

Posted May 22, 2006 - 07:02 AM

#2

Depends what tires you have and what riding you do. If you have an aggressive dot knobbie tire like the Kenda Trackmasters rear and Michelin ac-10 front, you will not be happy off road with anything above 17 front and 14 rear. If you are using something like Trail wings (death wings) You might not want to go off road at all.
If you only ride on the street, who cares about fuel mileage. Just run what works best. Why compromise safety for fuel savings?

  • simon@vic

Posted May 22, 2006 - 07:43 AM

#3

run the same as off road. 14 front 12 rear {or lower}. you will not notice any fuel range dif between 12psi and 25.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.