dropped a valve seat.....


1 reply to this topic
  • scooter1100

Posted May 19, 2006 - 05:19 PM

#1

Hey guys, I need some opinions on what to do ; At 40,000km ,I put a fresh set of rings, valve job and a cam in my 650L and got about 1500miles (2200km) on it before I got a valve clearance (Clacking) that was too big to adjust out. I did the rebuild because the cam and rockers wore on that same port last year. Upon removal of the head (sp.plug was loose?! btw) I found a seat had dropped about the thickness of a dime. Is there any point in trying using this head (if repairable), or should I get a new one, or even a rebuilt better than oem? Or anyone ever heard of locking the seats in mechanically? any suggestions appreciated

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • frankstr

Posted May 19, 2006 - 07:18 PM

#2

Any good machine shop can put a oversize seat in ...no problem... :ride:





Related Content

Reviews

Honda XR650L 2017 by Chris.GVS


Honda XR650L 2017
  • - - - - -
  • 0 reviews
Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 2 replies
Forums
Photo
Supercross

Supercross Preview 2017 Part 1: Championship Contenders by Chris Cooksey


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  132 replies
Forums
Photo

2015 XR650L Squeaking noise by Crayjay


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 3 replies
Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.