will 2000 wr426 stator + flywhl fit 98yz400


2 replies to this topic
  • mpowers

Posted May 08, 2006 - 01:16 PM

#1

trying to find out if a 2000 wr426 flywheel and stator fit a 98 yz400f

any help would be cool

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Zique

Posted May 08, 2006 - 09:33 PM

#2

I would say that since the 98 wr400f stator and flywheel will swap into a 2000 yz426f that the reverse of that would be the same result. You should be fine.

  • BergRyder

Posted May 08, 2006 - 10:19 PM

#3

It may fit but.....
The CDI is different and you will have to either use a WR CDI or do the pink wire mod to the YZ CDI.
Also I think the ignition timing is different, the bike will run pretty good, 95% of performance but I think the stator holes have to be slotted and rotated to get full performance.
Good luck.





Related Content

Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.