Help: Need to plug frame holes so oil won't leak out

3 replies to this topic
  • srhines67

Posted May 07, 2006 - 10:30 PM


I took off the steering dampner bracket from the frame just below the handle bars and put the bolt back that runs through the frame that held the bracket in place. The person who had the bike before me installed it this way. Now I get a small oil leak out of one side. I would like to seal this better but gasket stuff doesn't seem to do the trick. Any ideas?

  • MotoGoalie

Posted May 08, 2006 - 06:07 AM


Have someone weld it over.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted May 08, 2006 - 10:02 AM


Try a copper sealing washer such as you find on drain plugs.

  • srhines67

Posted May 08, 2006 - 12:11 PM


Thanks. Thats it.

Related Content


Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  57 replies

Need help by Goforaride

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  68 replies

Thinking about Yamaha 250... by Arctic Pride

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F

Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.