yzf450 05 06 clamps question

3 replies to this topic
  • xantiasupermoto

Posted May 04, 2006 - 10:12 AM


have kayaba factory forks and I need to place them on my crf 250.
I would like to ask you the stantard offset of yzf450 05 06 and the distance from fork to fork in upper clamps, the diameter of central hole clamp and the lower clamp :excuseme stem length :crazy:

  • grayracer513

Posted May 04, 2006 - 11:00 AM


I can get that information for you, but not until I get home tonight. The '05 and '06 are not interchangeable. Besides the fork tube being set 2mm farther apart, the diameters of the outer tubes are different in the '06.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Wheel

Posted May 04, 2006 - 12:52 PM


I took these off an 06 YZF 450 that is assembled.

Diameter of fork in upper clamp- 55.75mm
Diameter of fork in lower clamp- 59.15mm
Distance between upper clamp holes-136mm
Top of lower clamp to end of stem-255mm

I can tell you that the diameters and stem length are the same for 05. We ran 05 forks on our 06 with 06 clamps for Arenacross. Don't know about width or offset on the 05.

  • xantiasupermoto

Posted May 04, 2006 - 01:18 PM



Related Content

WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Wilson the Blue Privateer by jetfuel

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies

Should I buy this bike? help....... by Numsa Hul

Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies

05 yz450f not fast enough by RedeyeYZ

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies

BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.