Suspension Adjustments


1 reply to this topic
  • Blome

Posted April 22, 2006 - 09:50 PM

#1

I have a 1997 XR600R that I'm in the process of rebuilding. I have taking apart the rear end and everything looked good, so I cleaned it then put it back together. When I tested the suspension today it felt like there was barely any rebound. I turned the adjustment at the bottom of the shock to the hardest setting when it was out of the bike, but today when I went to adjust it and make it softer I couldn't turn it either way. Anybody know why I could turn the adjuster while the shock was out of the bike, but now I can't when it's in the bike?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Blome

Posted April 23, 2006 - 02:47 PM

#2

Bump. I think I'm going to have to tear into it again.





Related Content

Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 7 replies
Forums
Photo

Fell Off Trailer by usafxr


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies
Forums
Photo

DirttyPig 2005 Xr650l Prroject! by braapmebb1moretime


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 22 replies
Forums
Photo

Post Apocalypse, ThumperTalk style! by Justin Pearson


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies
Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  28 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.