Assembling transmission...


4 replies to this topic
  • xjruss

Posted April 22, 2006 - 02:21 PM

#1

The manual says "spin the shafts and turn the shift drum by hand to check operation"...

For those of you that have been through this, have you really been able to turn the drum by hand and shift through all the gears? I can hardly turn it at all... it just seems like there's not enough leverage.

Thanks.

  • lightestYZF

Posted April 23, 2006 - 06:17 PM

#2

I too was not able to spin by hand but I was careful all three times have fixed gearbox and it worked once together - at least for a while but that is a different story.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • FFRacing79

Posted April 23, 2006 - 07:21 PM

#3

What I do before I put the "ratchet" assembly into the end of the shift drum, I use a 12mm T-handle to operate the shift drum while I spin the trans. Works for me! Tdub

  • mkporn

Posted April 24, 2006 - 07:29 AM

#4

What I do before I put the "ratchet" assembly into the end of the shift drum, I use a 12mm T-handle to operate the shift drum while I spin the trans. Works for me! Tdub



This is the only way^^^^^ :thumbsup:

  • scottpb33

Posted April 24, 2006 - 11:48 AM

#5

I test by gettign a second person and hook up my cordless drill with a socket and have the person go at a slow speed while I shift and check that all is workign as it should





Related Content

Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  91 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.