RE: Stock Horsepower Rated from Engines


10 replies to this topic
  • MountainMax

Posted April 21, 2006 - 08:43 PM

#1

NE1 here have the stock HP info for all the WR bikes and different years? just looking to compare them, I want Stock Rated HP's or Stock Dyno'd Hp at the rear wheels, or both, I have searched and found some info here but most were modded and not clear.

  • Matty05

Posted April 22, 2006 - 03:54 AM

#2

The '05 450's make about 37hp bone stock.
In comparison, a mildly modded wr250 will make ~35hp.

  • MountainMax

Posted April 22, 2006 - 04:13 AM

#3

WoW, that number is way lower then I thought It would be.

  • TimBrp

Posted April 22, 2006 - 04:55 AM

#4

My Cert. of Origin says 59 horsepower. That's gotta be at the motor. Still very hard to believe though. Hate to say it but she don't feel anywhere near 59HP.

  • MountainMax

Posted April 22, 2006 - 04:58 AM

#5

That Certificate may be what horsepower class it's ratet at for registeration purposes. I don't beleive it's that high either, was hoping for around 50Hp though. IM spoiled with 2 stroke snowmobile engines, my 1980 440 stock had 80HP, the 77 440 had 96HP stock, so I am a bit disapointed in the way low numbers in these thumpers.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • OlaGB

Posted April 22, 2006 - 08:19 AM

#6

That Certificate may be what horsepower class it's ratet at for registeration purposes. I don't beleive it's that high either, was hoping for around 50Hp though. IM spoiled with 2 stroke snowmobile engines, my 1980 440 stock had 80HP, the 77 440 had 96HP stock, so I am a bit disapointed in the way low numbers in these thumpers.


The snowmobiles wasnt single cyl :thumbsup:

The 03` wr450f has been tested to + - 45hp at the rear wheel bone stock on a dyno .. The dyno owner said so.. A wr450 with slipon and jetting made just over 50.. 52 or something..

The bike doesnt feel fast in 60mph on the road, but it feels completely insane in the woods :thumbsup:

  • MountainMax

Posted April 22, 2006 - 08:21 AM

#7

Thanks for the update, but what is a slipon?

  • JSanfilippo

Posted April 22, 2006 - 11:56 AM

#8

In the dirtbike e-start 450 comparo a stock WR 450f (jetted, throttle stop, gray wire) mad 46.7HP at the wheel with the stock pipe (inner baffle removed, big baffle in place), 48.X with an FMF Q2, and almost 50 with a pro circuit Type 496. The only bike that made more power in the test was a the TE 450 which made 50HP and change. The CRF 450X and KTM 450exc were both around the 45hp range.

  • OlaGB

Posted April 22, 2006 - 01:32 PM

#9

Thanks for the update, but what is a slipon?


An aftermarket rear part of the exhaust system.. the muffler..

Ola

  • MountainMax

Posted April 22, 2006 - 01:33 PM

#10

Thanks, heard of them as silencers, stingers, mufflers, but never slipons, lol

  • Lok47

Posted April 22, 2006 - 03:08 PM

#11

Thanks, heard of them as silencers, stingers, mufflers, but never slipons, lol


that's what they're called in the sportbike world when it's not a full system. Either a bolt on or slip on exhaust canister.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.