Applied Triple Clamp Risers


3 replies to this topic
  • Terrain Rider 4z

Posted April 14, 2006 - 06:27 PM

#1

I have a friend looking to raise his bars on an 01 426. Is there any way to put a riser on an applied clamp with Pro Taper bars?

  • Terrain Rider 4z

Posted April 15, 2006 - 03:24 PM

#2

Any ideas?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • bg10459

Posted April 15, 2006 - 10:17 PM

#3

Different risers (bar clamps) will fit on the top triple clamp. Try an applied +10 or +15mm, sized for the bars he's got.

  • SureBlue

Posted April 15, 2006 - 11:30 PM

#4

You can use this type of bar risers on any clamps
Posted Image
The risers are placed between the fork crown and the handlebars to raise the bars, available in different heights for both 7/8 an 1-1/18 bars, also available as adapters changing your bar from 7/8 to 1-1/18. They usually come with longer mounting bolts too as pictured.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.