650l fork Q's


2 replies to this topic
  • 1150santa

Posted April 13, 2006 - 11:32 AM

#1

I have a 96 650 L fork and want to change the oil.
What is the stock oil level for these forks?
Is this measured at full compression?
Is this with the spring out or in the fork leg?
Anything to watch out for?
Thanks.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Boy named sue

Posted April 15, 2006 - 04:14 PM

#2

It's 146mm at full compression with the spring out I went 148mm with 10w but I'm 225lbs. hope this helps

  • underwatersimon

Posted April 15, 2006 - 06:30 PM

#3

The recomended volume is 564ml - this was a little shy of the mm measurement so I added 2 more - It was much easier to measure the volume first, this enables you to keep both forks the same.

make sure to bleed before reinserting the top. Just put it through a few strokes...SLOWLY! or you'll overflow.





Related Content

Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  28 replies
Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 8 replies
Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
Forums
Photo

DirttyPig 2005 Xr650l Prroject! by braapmebb1moretime


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 22 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.