bottom end

1 reply to this topic
  • pumpupthevolume16

Posted April 11, 2006 - 09:37 AM


how do you no if your bottom end is blown. and if it is blown what parts will it need and how much.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • obxnc

Posted April 11, 2006 - 11:29 AM


Well, I had the connecting rod sieze on mine. Had to replace the crankshaft and gaskets. I also replaced the rings on the piston and put in a HotCams exhaust cam with auto decompression. I have about $600 in those parts alone, not including the oil and coolant. $450 not including the exhaust cam. Plus I saved a ton by doing the work myself. It was pretty straight forward though. If you know your way around a toolbox, then you should do fine.

Related Content


2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Thinking about Yamaha 250... by Arctic Pride

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.