Specs for 1993 CR250

Started by squirrel1 , Apr 03 2006 08:35 AM

2 replies to this topic

  • squirrel1

Posted 03 April 2006 - 08:35 AM

#1

I don't have a manual.  Can anyone give me the following information?:

Torque specs for:
-All motor mounts
-Swingarm pivot

Standard jetting specs:
-Main jet
-Pilot jet
-Needle clip position

-Standard Fork oil height
Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

  • HawkGT

Posted 03 April 2006 - 10:54 AM

#2

squirrel1 said:

I don't have a manual.  Can anyone give me the following information?:

Torque specs for:
-All motor mounts
-Swingarm pivot

Standard jetting specs:
-Main jet
-Pilot jet
-Needle clip position

-Standard Fork oil height

per OEM service manual for a 93--

hanger plate bolt: 20 ft-lbs
upper mounting bolt: 31 ft-lbs
lower mounting bolt: 47 ft-lbs

swingarm: 65 ft-lbs

main: 175
pilot: 55
needle: 3rd
air screw: 1 3/4

fork oil level: std 118, max 93, min 136
fork oil capacity: std 559cc, max 584cc, min 541cc

  • squirrel1

Posted 03 April 2006 - 12:47 PM

#3

HawkGT said:

per OEM service manual for a 93--

hanger plate bolt: 20 ft-lbs
upper mounting bolt: 31 ft-lbs
lower mounting bolt: 47 ft-lbs

swingarm: 65 ft-lbs

main: 175
pilot: 55
needle: 3rd
air screw: 1 3/4

fork oil level: std 118, max 93, min 136
fork oil capacity: std 559cc, max 584cc, min 541cc


Thanks!
Back to Honda 2-Stroke


  1. ThumperTalk
  2. Dirt Bike
  3. Make / Model Specific
  4. Honda
  5. Honda 2-Stroke
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.
Register Close

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!