00 wr400 starting problems


2 replies to this topic
  • paulm

Posted April 02, 2006 - 09:13 AM

#1

my wr runs great once started, but initial starting is a problem. i have to kick it over with the cold start pulled three or four times. then i have to push the cold start back in, and then the bike will fire. however once it starts i have to pull the cold start again before it dies. when the bike is warm, i have no problems. i adjusted the valve and have same problem before and after adjustment. any suggestion?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • haimesyboi

Posted April 02, 2006 - 11:08 AM

#2

i recently developed that problem where the bike will not cold start with the choke pulled, but once it fires the choke is needed to keep it from dying??untill it warms up anyone have any ideas?? :thumbsup:

  • Numskull

Posted April 02, 2006 - 06:26 PM

#3

Rebuild your carburetor :thumbsup:




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.