Anyone run aftermarket hubs!? I need help?

No replies to this topic
  • MOmilkman

Posted October 08, 2001 - 01:29 PM


Does anyone have their front stock hub lying around they might want to sell for a reasonable price?
I have replaced my front wheel bearings 4 times since I bought the bike and as I was getting ready to replace them again tonight I am starting to lean torward the fact that the problem might be the hub and not the bearings.
Both bearings check fine (no play) but you can easily slip the bearing in one side of the hub with your hand. (no socket tap in method)
I imagine this is the source of my problem.

Anyway its a 99 WR400. Let me know if anyone has anything they might be willing to part with.

Darin in Missouri - My Hurricane 1999 WR400F
Enduro Heaven - Ozark Mountain TrailRiders


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.