Edelbrock idle adjuster

2 replies to this topic
  • pbusanga

Posted March 17, 2006 - 05:30 AM


Hi if ,like me,you dont like the idle adjuster cable on the Edelbrock carb, just flopping around under your tank an easy fix is remove the overflow tube from its holder (clip) on left corner of carb (tube is zip tied to the other over flow tubes). the idle adjuster cable just fits through this clip and is held neatly against the carb. .. just thought i would share

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

Posted March 17, 2006 - 07:22 AM


Thanks for sharing.

I'll be doing that this weekend while the tank is off. :thumbsup:

  • 4Takt

Posted March 17, 2006 - 07:33 AM


Here's a more elegant solution:


Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.