trouble with brake pad pin

2 replies to this topic
  • letter

Posted March 12, 2006 - 02:48 PM


I can't get the front brake pad pin to come out of the caliper. It unscrews all of the way but then it does not come out. Does anyone have any advice? Thanks.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • RCannon

Posted March 12, 2006 - 03:11 PM


Find a small punch and push it out is one option . The brake pads are spring loaded against the pin. If you can push up on the pads it will help.

  • 757holeshot

Posted March 12, 2006 - 03:13 PM


the anti rattle clip behind the pads hold a small amount of pressure on the pads and pin try press down on the pads then pull the pin

Related Content


The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  91 replies

Thinking about Yamaha 250... by Arctic Pride

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies

Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.