What is the 2000 426 clutch fix.

4 replies to this topic
  • Thumper44

Posted March 08, 2006 - 03:22 PM


I've read through some posts and cannot really find any detailed information on this. Any help would be great.

  • grayracer513

Posted March 08, 2006 - 03:39 PM


If the basket and clutch boss are in good condition, what you basically do is rebuild the clutch with OEM parts for an '01 or '02 in place of the parts for the '00. Be sure to add the "boss spring", PN 5JG-16383-00-00, to smooth out the engagement some, and use a full set of new springs. If the clutch boss has no holes drilled along its spline grooves to help spread the oil around, they should be added (12-15 of them).

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Thumper44

Posted March 08, 2006 - 05:22 PM


Thanks for the reply. You wouldn't happen to knoe all the part numbers that should be replaced? If not, cool - you got me going in the right direction.


  • shanedut

Posted March 08, 2006 - 08:23 PM


Here is an old post of the parts needed for the 2000 clutch upgrade and part numbers.


this should be what ya were looking for

  • cowboyona426

Posted March 09, 2006 - 10:30 PM


A good idea for the 00... it makes the clutch a lot smoother.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.