XR400 vs Xr600 rear wheel vs. XL


8 replies to this topic
  • SanJoseWR450F

Posted March 06, 2006 - 10:35 PM

#1

Is a 96 XR 400 rear wheel different from a 96 XR600 rear wheel? How about an XL wheel, besides the cush drive, will an XL wheel fit on a XR? Thanks.

  • targetdrone

Posted March 06, 2006 - 11:24 PM

#2

No. The XL wheel is wider by about a half inch.

  • SanJoseWR450F

Posted March 07, 2006 - 09:47 AM

#3

Thanks about the XL wheel. How about an XR400 vs. XR600, are the rear wheels the same or different?

  • Phuzzy McPhuzzface

Posted March 07, 2006 - 11:04 AM

#4

Thanks about the XL wheel. How about an XR400 vs. XR600, are the rear wheels the same or different?


Not sure, but my:
'93 250R rear is a 18x1.85 (front is a 21x1.60)
'06 L rear is a 18x2.15 (front is a 21x1.60)

I was kinda hoping they might be interchangeable, in the off-chance I'd want to add pure dirt skins to the L. The fron looks like it might swap, speedo/odo drive included. I still have to verify it, though.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • SanJoseWR450F

Posted March 07, 2006 - 03:11 PM

#5

Thanks, I am hoping the hub is at least the same from XR400 to XR600. I'm converting an 89 drum brake XR600 to disc brake and I seem to be able to find a lot of XR400 rear wheels and no XR600 wheels. I can always lace a new rim on it.

  • Blade Man

Posted March 07, 2006 - 04:11 PM

#6

you can look in bikebandit.com and compare part #s

Very usefull to see what fits what if the part #s are the same.

  • slomotobug

Posted March 07, 2006 - 05:05 PM

#7

XR400 wheel should fit, they fit my 650 as long as I use the 400 caliper mounting bracket because the rotor is a different size, but the calipers are the same, and the hubs are the same size. Aslo a CR250/500 rear wheal are the same hub/rotor size, till you get into the aluminum frame 250. :thumbsup:

  • LotsOfBikes

Posted March 07, 2006 - 09:54 PM

#8

.
The XR650L rear wheel does not have cush drive. It is interchangeable with the XR600R, as I have done before.
.

  • byron555

Posted September 14, 2008 - 06:52 AM

#9

XR400 wheel should fit, they fit my 650 as long as I use the 400 caliper mounting bracket because the rotor is a different size, but the calipers are the same, and the hubs are the same size. Aslo a CR250/500 rear wheal are the same hub/rotor size, till you get into the aluminum frame 250. :excuseme:



Could you put a xr650L rotor on the xr400 rear hub instead?





Related Content

Forums
Photo

DirttyPig 2005 Xr650l Prroject! by braapmebb1moretime


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 22 replies
Forums
Photo

Post Apocalypse, ThumperTalk style! by Justin Pearson


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies
Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Forums
Photo

Would a Young Scott Summers still be Competitive today on an XR600R? What would he ride to be competitive today? by Jayzonk


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  158 replies
Forums
Photo

Fell Off Trailer by usafxr


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.