03 WR450 case needed!!!!!!!


4 replies to this topic
  • MTRSPORTDAN

Posted February 27, 2006 - 04:18 PM

#1

I was wondering if anyone has bought a new set of cases. I looked it up on Yamaha's parts diagram and they don't sell just one side. Does anyone have a right side case, the side with the kick starter? I started my bike and it kicked back at me and put a 3" hole on the back side of the case where the kick starter is. Any help would be great. Thanks, Dan

  • Indy_WR450

Posted February 27, 2006 - 08:18 PM

#2

Even though you kicked it the engine back fire can damage the cases due to the electric starter drive design in 03 does not have a torque limiter for backfires. The 04 upgrade along with the case repairs is a good idea. :thumbsup:

http://www.wr450.com...inals/index.htm

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • PBDBLUE

Posted February 27, 2006 - 08:30 PM

#3

You will have to replace both halves. All of the critical machining is done to the cases as a matched set (i.e. bearing bores, deck surfacing, etc).

  • MTRSPORTDAN

Posted February 28, 2006 - 08:09 AM

#4

Thanks for the help guys. I am going to look into it.
Dan

  • MTRSPORTDAN

Posted February 28, 2006 - 10:14 PM

#5

Indy, is this the woodruff key fix that you posted the picture of? Thanks, Dan




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.