WR 426 Noise level


No replies to this topic
  • jbrooks26

Posted February 27, 2006 - 04:07 PM

#1

Is anyone meeting the 96db requirements with stock exhaust on the 426? I took readings with the GYTR insert in my 02 WR426 and they came out at 109db. These readings were taken with no wind, and the throttle at 1/2 opening because I don't currently have access to a tach. Has anyone been able to reach 96 with the stock exhaust and another tip? Thanks,

Josh




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.